Joyetech eGo Twist+ Kit includes eGo Twist+ battery and CUBIS D19 atomizer. CUBIS D19 atomizer perfectly fits the new eGo Twist+, supporting 2 optional modes: Variable Wattage mode and BYPASS mode. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. It applies dual circuit protection with multiple colors to choose. Also the great performance and easy operation make the eGo Twist+ outstanding and unique.

Parameters

Tank size: 19mm (D) x 56mm (L)

Battery size: 19mm (D) x 97mm (L)

Battery capacity: 1500mAh

Battery Cell Type: 18500

E-juice capacity: 2ml

Output modes: VW/BYPASS

Wattage range: 5W - 30W

Resistance range: 0.2 -3 .5ohm

Colors: Black, Silver, Burgundy, Orange, Blue, White

It comes with

• 1 x eGo Twist+ Battery
• 1 x CUBIS D19 Atomizer
• 1 x NotchCoil 0.25ohm DL
• 1 x BF SS316-0.5ohm DL
• 1 x LVC Clapton-1.5ohm
• 1 x USB Cable
• 1 x Manual and Warranty Card
• 1 x Warning Card

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Alternative VW and BYPASS modes

Optimal airflow with intuitive design

Dual circuit protection

Top filling and top airflow

Anti-leakage cup design

New liquid-valve-control coil

Multiple atomizer heads can be applied

Power on and off: Press the fire button 5 times in quick succession, the button light will flash 5 times to indicate that it is ready to use. Press the fire button in the same way, the device will be powered off.

Switch VW/BYPASS modes: When the device is on, simply rotate the bottom ring to choose your mode. When you switch to VW mode, the indicator light will turn white for 2 seconds, then you're under VW mode. When you switch to BYPASS mode, the indicator light will turn orange for 2 seconds, then you're under BYPASS mode.

Adjust wattage: Simply rotate the bottom ring to choose suitable wattage (5W - 30W) under VW mode.

Protections: Short circuit protection/ Atomizer protection/ Low voltage protection/ Resistance examination

Battery Display Function: The light will flash slowly or stay lit when battery quantity is high. On the contrary, the light flashes frequently.

Battery QuantityLight condition60% - 100%Stay lit30% - 59%Flash slowly10% - 29%Flash moderately0 - 9%Flash frequently

Charging: Simply charge the eGo Twist+ by connecting it with a PC or Joyetech wall adapter via USB cable. When it's fully charged, the charging indicator will go out.

How to assemble:
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole CUBIS D19 is assembled. 

How to change atomizer head:
Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one. 
Note:
1. Please don't wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth. 
2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.

How to re-filling: 
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into the e-juice hole.
Note:
1. Please don't fill in through the middle hole of the atomizer cap.
2. Please don't overfill to avoid overflown.

How to adjust Airflow:
Rotating the ring on the atomizer cap clockwise or counterclockwise to adjust the air inflow. The air inflow will be the largest when both signs match with each other, otherwise it decreases when turning left or right.

• It doesn't come with liquids, you shall buy it separately.
• 
  

You can download FCC, EMC, LVD and RoHS certificates.

0.5 ohm이하 코일 사용시엔 튐 증상이 있을 수 있습니다. 모드기기 전용 액상을 사용해주세요.